Products
For façades, walls, enclosures and decorative features. Always on battens, creating an air cavity that ventilates, improves drainage and extends the life of the system.
Cladding · Mibawood
Natural timber with variation in tone: a living material, with movement of ± 2 %. Supplied in packs of 3.
With relief
The face is grooved into slats. The relief brings in shadows that move through the day and sharpen the contrast of the façade. In the Wild finishes, among them Wild Gray, a grey with a mineral cast.
Without relief
A smooth surface and a regular joint, for façades where the pattern comes from the layout rather than the shadow. It is the profile of the tongue-and-groove boards below, with the screw hidden.
Wild Terra · Wild Dark
Terra in reddish and pink tones from Indonesia; Dark in grey tones, from the same source. Tongue and groove, with the screw completely hidden.
Wild Terra
A thicker section, for façades where you want the relief of the board to show.
30 × 50 · 30 × 100 mm
Rounded ends and free orientation: vertical, horizontal or mixed, with metal brackets screwed top and bottom.
Cladding · Mibacomp
Three families for exterior walls, all sold in packs of 3. Ideal for low-maintenance spaces.
26 × 217 mm
Invisible screw. The family with the most colour options.
22 × 220 mm
Rounded edges, for panels with soft shadow lines.
22.5 × 245 mm
The widest board, with two different faces to choose from on site.
Brown, oak, grey and black across the range; white is added in the Dual family, and Clásico also offers two-tone versions in brown, oak and grey.
The whole range
The whole range
The whole range
The whole range
Cladding · Mibambú
A warm, contemporary finish with the durability of densified bamboo. Supplied in packs of 3.
12 × 103 mm
A narrow board with a flat surface, for compositions with fine lines and pronounced joints.
14 × 140 mm
Deep grooves that draw shadow across the façade and give relief to large panels.
Before you order
Battens, edge profiles and fixing systems, material by material.